Bluephase PowerCure – light-curing lamp with intelligent LED light and patented Polyvision technology

Advantages:

• Polyvision technology – an automatic assistance system that ensures safe results.
• The curing light automatically detects movement of the handpiece during the procedure.
• In case of incorrect operation, the user is alerted via vibrations, and the exposure time is automatically extended by 10% if necessary.
• If movement prevents proper polymerization, the light automatically interrupts the exposure cycle, allowing it to be repeated.
• Active protection prevents the light from activating in open space.
• Polywave LED – a high-performance LED that enables the polymerization of all light-curable materials.
• Short curing times, up to 10 seconds, due to the high light intensity of 3000 mW/cm².
• 10mm optical guide
• Additional Pre-Cure program
• When Class I and Class II direct restorations are placed on permanent posterior teeth, a 3-second exposure from the occlusal area is sufficient for all polymerization steps using Bluephase PowerCure in 3sCure mode.
• Adhese Universal, Tetric PowerFill, and Tetric PowerFlow can be exposed to a light intensity of 3000 mW/cm², significantly reducing polymerization time while maintaining the ability to achieve superior aesthetic results.

Technical data:

• Light source: Ivoclar Vivadent Polywave LED
• Wavelength range: 385–515 nm
• Light intensity (3sCure mode): 3000 mW/cm² ± 10%
• Light intensity (Turbo mode): 2000 mW/cm² ± 10%
• Light intensity (High Power mode): 1200 mW/cm² ± 10%
• Light intensity (PreCure mode): 950 mW/cm² ± 10%
• Optical guide: 10>9mm, autoclavable
• Operation mode: Intermittent – 3 min on, 7 min off
• Handpiece dimensions (without optical guide, L x W x H): 170 x 30 x 30 mm
• Handpiece weight (with battery and optical guide): 135g
• Handpiece operating voltage: 3.7V DC (with battery) / 5V DC (with power pack)
• Charging base operating voltage: 5V DC
• Input power: 100 - 240V AC, 50-60Hz, max 0.1A
• Output power: 5V DC, 3A
• Charging base dimensions (Ø x H): 110mm x 55mm
• Charging base weight (without radiometer): 155g
• Charging base weight (with radiometer): 145g
• Charging time: approx. 2 hours (when fully discharged)
• Handpiece power supply: Lithium-ion battery
• Operating time: approx. 20 minutes with a fully charged battery in High Power mode

Operating conditions:

• Temperature: 10°C - 35°C
• Relative humidity: 30% - 75%
• Ambient pressure: 700 hPa - 1060 hPa

Transport and storage conditions:

• Temperature: -20°C to +60°C
• Relative humidity: 10% - 75%
• Ambient pressure: 500 hPa - 1060 hPa
• The lamp should be stored in closed spaces and must not be exposed to severe vibrations.
• Recommended battery storage temperature: 15–30°C
• The battery should be kept charged, and the storage period should not exceed 6 months.

Presentation:

• Bluephase PowerCure – 1 charging base with power cable and power supply + 1 handpiece + 1 handpiece holder + 1 optical guide 10>9 mm + user manual + 50 protective sleeves + 1 anti-glare screen